Speaker Wall Mount Bracket Tilting Swivel Heavy Duty 100lbs 8-15" 2

• 【Convenient installation】: The speaker mounts can be installed on the wall, which can be tilted up and down by 90°, and the level can be adjusted 180°, so that your speakers can get a perfect angle of sound
• 【Safe and reliable】: Made of solid steel, it can withstand additional loads of up to 100 pounds.
• 【Universal and compatible】: This speaker wall mount is almost compatible with most 8" 10" 12" 15" speakers on the market
• 【TIPS & NOTES】: Please double check that the size and appearance match your speaker before purchasing.
• 【Package includes】: speaker Mount, instructions, and all screws for installation.
• 【Note】: The complimentary screws are only suitable for use on solid walls and brick walls. They cannot be used on plaster walls and wood panels.
• 【Service and Guarantee】:Howonder provides a quality guarantee, if the product has quality problems, please contact us.

Speaker Wall Mounts MY-23

We recommend installing the mount with your own screws or bolts compatible with the speakers

The diameter of the pre-drilled holes could be easily found in product pictures.

Package Include:

2 x Black Speaker Mount

1 batch of screw accessories

1X Instructions

One-piece die-casting, stronger bearing capacity

Porous adjustment, more precise angle

Drill hole size requirements

drill with a 10mm drill bit. Depth 65-70mm.

If there are no suitable two mounting points on the speaker, you can use four self-tapping screws to fix it.

Rotate down 60 degrees

Rotate up 60 degrees

Rotate left angle

right rotation angle

1. Separate the bracket 1 and 2

2. Draw 4 screw holes

3. Drill holes with a 10mm drill bit. Depth 70mm.

4. Drive the screws into the holes and fix them with wrench 14.

5. Fix the bracket on the speaker.

6. Fix the accessory screws in the middle hole of the bracket.

7 . Hang the speaker in the opening of the bracket. Fix the bracket with screws and nuts.

8. Adjust the angle and replace the accessory screws to the middle hole. Tighten the top and bottom screws.